To complete the copy, follow the procedure as indicated
- Start copying until the "Check Operation" screen
- Press the menu button at the top right to enter manual recording as shown in the image below
- Move the slider above 4 seconds
- Open the lower part of the control unit and locate the two buttons A and B
- Button A records complete opening
- Button B records partial opening
- Press and hold the desired key for 1 second until the corresponding LED flashes
- Within 5 seconds, press the Transmit opening signal button on the app.
- The led on the board will light up steadily for 1 second and then go off, indicating that memorisation has been completed
- Press the Transmit Open Tone button on the app twice
- The gate / overhead door will perform a test opening