Intric

To complete the copy follow the procedure as indicated

1. Start copying until you reach the " Verify Operation " screen.
2. Press the menu button at the top right to enter manual recording as shown in the image below.
3. Both sliders at 1 second.
4. Bring the device SOLO within 5cm of the receiver.
   
   
5. On the receiver, press the SW1 button once. The LED should flash steadily.
   
   
6. On the 1Control app, press "Transmit Source Code." The LED should remain solid.
7. Then press "Transmit opening signal" and wait until the LED on the control unit goes out.
8. Then press "Next" and press the "Open/Close" button a couple of times.