To complete the copy, follow the procedure as indicated
1 Start copying until the "Operation Check" screen
2 Press the menu key on the top right to enter manual recording as shown below
3 Move the upper slider to 4 seconds 
4 On the control unit, press the MEMO button and keep it pressed: the LED flashes slowly. 
5 On the app, press the Transmit opening signal key
6 Keep the MEMO button pressed until the LED starts flashing again, then release the MEMO button: the LED continues to flash
7 On the app, press the Transmit opening signal button again
The LED stays on for 2 seconds, indicating the correct memorization