GL20 series

Updated on 23/01/2024

  1. Start copying until the "Check operation" screen
  2. Press the menu button at the top right to enter manual recording as in the image below
  3. Move the slider higher than 6 seconds

  4. Press the “ P2 " MEMO button on the receiver and keep it pressed: the LED “ L1 ” flashes slowly

  5. On the application, press the “Send opening signal” button
  6. Always keep “MEMO” pressed and wait until LED “L1” starts flashing again
  7. Press the “Send opening signal” button on the application again
  8. End of memorization: LED “L1” remains lit for 2 seconds, signaling correct memorization.
  9. Release the “MEMO” button.

This guide in other languages: Italiano Deutsch Français Español