ZF1N

To complete the copy follow the procedure as indicated

1. Start copying until you get to the "Verify Operation" screen
2. Press the menu button on the top right to enter manual recording as in the image below
3. Move the slider above 10 seconds
   
   
4. On the control unit, press and hold the "CH1" button, the LED starts flashing
   
   
5. On the application, press the "Transmit opening signal" button and wait approximately 5 seconds
6. The LED lights up steadily to indicate that the code has been stored.
7. Release the "CH1" button

If the LED does not light up steadily, release the "CH1" button, wait 5 seconds and repeat from step 4