Supramatic 3

To complete the copy follow the procedure as indicated

1. Start copying until you reach the "Check Operation" screen.
2. Press the menu button at the top right to enter manual recording as shown in the image below
3. Move the slider below 4 seconds.
   
4. Press PRG until the digits read "00".
   
5. Use the arrows to find menu "11".
   
6. Press the PRG button until the number "11" in the menu flashes.
7. Bring the SOLO close to the control unit (less than 5 cm) and press "Transmit source code".
8. The control unit will confirm registration by flashing and displaying "11."
   
9. Press PRG and the number 11 will remain fixed.
10. Press the down arrow twice until you reach the number "00"
11. Press PRG.
12. On the 1Control app, press "Next" and press the round "Open/Close" button.