SOLO supports many SOMFY remotes for gates and garages. This guide covers the most searched families and the practical steps needed for a correct check.
RTS families are among the most common SOMFY checks.
The procedure may require a step near the control unit.
If the model is not supported, SOLO KIT remains the practical backup.
Most SOMFY searches revolve around RTS remotes and installations where the goal is to add smartphone opening without changing the whole system at once.
If your SOMFY remote is supported, SOLO works alongside the existing transmitter and lets you open the gate or garage from your phone while keeping the usual access method active.
On some SOMFY families the copy process includes a step near the control unit or receiver, often involving buttons such as PROG or RADIO. That behaviour is expected.
With some SOMFY remotes the app asks you to move near the control unit and use the PROG or RADIO button. That step is used to complete command activation on the receiver and is common on protected rolling code installations.
This static list gives you a first practical orientation. For the final confirmation, always use the compatibility page, especially if your remote is old or exists in very similar-looking variants.
Check the SOMFY model code and verify whether it belongs to a compatible family.
Start the copy in the app while holding the remote near SOLO and complete the first steps.
If requested, move close to the automation and press the indicated programming button before the final test.
If the model is not compatible or if the compatibility page tells you that a direct connection is required, SOLO KIT is the correct solution: a small wired kit that makes the automation controllable without depending on the current remote compatibility.
The correct check is based on the remote model, not on the motor brand or the control board. You can use the 1Control compatibility page and the static model list on this page as a practical starting point.
No. In most cases 1Control SOLO works alongside the original remote instead of replacing it. That means you can keep using the remote you already have and add smartphone opening when useful.
Often yes, especially when the app asks you to complete the learning process near the automation. It does not mean the remote is incompatible.
If the model does not appear in the verification flow or the system clearly requires a different setup, the most practical path is SOLO KIT. It removes the dependency on the current remote by adding a dedicated receiver to the automation.
Dedicated brand pages help you recognize the right models and move more quickly through compatibility notes, exceptions, and recommended products. If your remote is not SOMFY, continue from the SOLO compatibility hub by brand or open the full compatibility page directly.
All logos and brand names mentioned here remain the property of their respective owners. 1Control is not affiliated with the owners of the brands mentioned on this page.
Subscribe to the 1Control newsletter and stay updated on offers and new products coming soon. Plus you will immediately receive a 5% discount code to use on your first purchase!
Thank you!
Registration was successful, check your inbox.