Boitier Verin

Copy procedure:

1. Start copying until you reach the "Check Operation" screen.
2. Press the menu button at the top right to enter manual recording as shown in the image below
3. Move the slider above 1 second
   
   
4. Place "SOLO" near the symbol shown in the image with the notch facing the control unit
   
   
5. On the app, press the "Send opening signal" button
6. Wait 15 seconds
7. Set the transmission time to 5 seconds
8. Press the "Transmit opening signal" button again
9. Wait 10 seconds
10. The gate should open, if not repeat the procedure from step 3, if the gate opens press "Next" at the bottom of the page