To complete the copy of your remote control
- Start copying until you get to the "Verify Operation" screen
- Press the menu button on the top right to enter manual recording as in the image below
- Move the slider above 2 seconds
- Wait for the gate to close and for any warning lights to go out
- Press the button shown in image "A)" for 2 seconds
- Place ONLY where indicated in red in image "B)"
- Press the "Transmit opening signal" button approximately every 3 seconds until the gate is operated
If the procedure fails, repeat from step 3, setting the transmission time to 1 second every and at step 7 transmit once every 2 seconds.