Stick 30 / Stick 50

To complete the copy, follow the procedure below:

1. Start copying until you reach the " Verify Operation " screen.
2. Press the menu button at the top right to enter manual recording as shown in the image below
3. Move the slider above 4 seconds
   
   
4. On the receiver, press the " PROG " button for one second and you will hear a beep. The receiver will enter programming mode.
   
   
5. On the app, press the " Transmit opening signal " button, the receiver will emit a sound signal for half a second.
6. Wait 20 seconds for the control unit to exit programming mode.
7. Now press " Next " and press the " Open/Close " button, if the gate does not open, wait 5 seconds and press it again.