S200II

To complete the copy, follow the procedure as indicated

1. Start copying until the "Check operation" screen
2. Press the menu button at the top right to enter manual recording as in the image below
   
   
3. Move the slider higher than 10 seconds
4. On the control unit, press the V1 button.
   
5. Press the Transmit opening signal button on the app
6. The LED on the V4 key should flash, press the V4 key.
7. The LED on the V4 button should remain lit steadily for 2 seconds, this signals correct learning by the control unit.
8. Wait approximately 30 seconds for the LED to stop flashing.