FAAC or GENIUS remote copy procedure
Models: TML 433SLH, DL 868 SLH, XT 868 SLH, XT 433 SLH, T 868 SLH, T 433 SLH AMIGOLD, AMIGO, KILO
Press and keep pressed the button 1 and at the same time press 4 times the button 2 of 1Control WHY remote. The red LED starts flashing. Release the buttons.
Press the button on the original remote untill the red LED become fixed and then release it.
QWhen the red LED flashes slowly two times, on the original remote control press at the same time the two buttons in diagonal as shown:
The LED will start flashing. While it’s flashing, press the button of the original remote control that you want to copy.
When the green LED flashes quickly press the 1Control WHY’s button in which the remote control is to be stored.
The copy is finished. Try opening the gate/garage, if it does not open, repeat the procedure from point 1. If by repeating the procedure is still not working, probably the receiver is locked.
NB: In order to copy a FAAC/GENIUS remote control, it is necessary to have a MASTER (original) remote control.
To recognize a Master remote control, press any button on the remote control and check the LED flashing mode:
- if it flashes briefly one time before becaming fixed on, it is a MASTER remote control.
- if it becames fixed on immediately, it is a SLAVE remote control and cannot be copied.