BFT remote copy procedure
Models: MITTO, MITTO M, MITTO RCB, MITTO A, TRC, GHIBLI, MURALE, KLEIO
Press and keep pressed the button 1 and at the same time press 4 times the button 2 of 1Control WHY remote. The red LED starts flashing. Release the buttons.
Press the button on the original remote untill the red LED become fixed and then release it.
When the red LED flashes twice slowly, on the original remote control press the hidden button on the back (if present) or the first two buttons at the same time for about 3 seconds.
When the green LED flashes quickly press the 1Control WHY’s button in which the remote control is to be stored.
Nearby the gate/garage (within 5 meters) press the 1Control WHY copied button for 10+ seconds, the red LED start flashing. Wait for the LED to turn off.
The copy is finished. Try opening the gate/garage, if it does not open, repeat the procedure from point 1. If by repeating the procedure is still not working, probably the receiver is locked.